Contents - Table Of Contents
- Table Of Contents
- Safety in Systems
- PVG 16/32 sectional drawings
- PVG 128/256 Sectional Drawing
- PVG 16 installation
- Plug orientation
- Installation of lever
- Bleeding
- PVE Series 6
- PVHC
- LED characteristics
- PVG 32 installation
- PVEP series 4
- PVED-CC series 5
- PVE series 7
- Standard main spool assembly
- PVG 128/256 installation
- Pump side module
- Pressure setting
- PVG acronyms found in service parts
- PVG 16 service parts
- Pump side module PVPV
- Electrical LS pressure unloading valve, PVPX
- PVB with PVLP/PVLA, basic module
- PVLP Shock and PVLA, Suction Valves
- PVBS, main spool
- PVM mechanical activation
- PVMD cover
- PVH hydraulic actuation
- PVHC high current actuation
- PVS/PVSI end plates
- PVAS stay bolts
- Seal kits
- PVG 32 service parts
- Pump side module PVPM/PVPVM
- External pilot pressure adapter, PVPC
- PVB basic module
- Basic module, PVBZ
- PVBZ with PVBD diverter
- PVBS main spool
- PVMD, PVMR and PVMF covers
- PVSI, PVSD, PVST end plates
- PVE series 4 PVEO
- PVE series 4 PVEA
- PVE series 4 PVEM
- PVE series 4 PVEP
- PVE series 4 PVEU
- PVE series 4 PVEH
- PVE series 4 PVES
- PVE series 7 PVEO
- PVE series 7 PVEO-HP
- PVE series 7 PVEM
- PVE series 7 PVEA
- PVE series 7 PVEH
- PVE series 7 PVES
- PVG 128/256 service parts
- PVB 128, basic module
- PVB 256, Basic Module
- PVEO on/off actuator
- PVEH proportional actuator
- PVS end plates
|
PVP kits (continued)Description Code number P-port T-port/HPCO-port LetterOpen center with PPRV for PVE and pilot oilpressure take-off157B5180 G3/4” G3/4” E157B5380 1-1/16-12 UNF 1-1/16-12 UNFOpen center with PPRV for PVH/PVHC and pilotoil pressure take-off157B5190 G3/4” G3/4” F157B5390 1-1/16-12 UNF 1-1/16-12 UNF11008851 G3/4” G3/4”Closed center 157B5001 G1/2” G3/4” G157B5101 G3/4”157B5201 7/8-14 UNF 1-1/16 UN157B5301 1-1/16 UNClosed center with PVPX facility 157B5103 G3/4” G3/4” HClosed Center with PPRV for PVE 157B5011 G1/2” G3/4” I157B5111 G3/4”157B5211 7/8-14 UNF 1-1/16 UN157B5311 1-1/16 UNClosed center with PPRV for PVE and PVPX facility 157B5013 G1/2” G3/4” J157B5113 G3/4”157B5213 7/8-14 UNF 1-1/16 UN157B5313 1-1/16-12 UNF 1-1/16-12 UNFClosed center with PPRV for PVE and pilot oilpressure take-off157B5181 G3/4” G3/4” K157B5381 1-1/16-12 UNF 1-1/16-12 UNFClosed center with PPRV for PVH/PVHC and pilotoil pressure take-off157B5191 G3/4” G3/4” L157B5391 1-1/16-12 UNF 1-1/16-12 UNFPVP parts listItem Description CodenumberLetterA B C D E F G H I J K L1 Service tool for relief valve 155L6494 - - - - - - - - - - - -2 Sealed adjusting screw (forsealing with a wire)155L6489 - - - - - - - - - - - -3 Sealed plastic plug, black (50pcs.)155L6168 1 1 1 1 1 1 1 1 1 1 1 1Sealed plastic plug, yellow (50pcs.)155L6167 - - - - - - - - - - - -4 Pilot supply for PVE 13.5 bar 155L5157 - - 1 1 1 - - - 1 1 1 -4 Pilot supply for PVH/PVHC 25bar11077272 - - - - - 1 - - - - - 15 Relief valve 155L6495 1 1 1 1 1 1 1 1 1 1 1 16 Plastic plug for G1/2” - 2 2 2 2 2 2 2 2 2 2 2 2Plastic plug for 7/8-14 UNF -Plastic plug for G3/4” -Plastic plug for 1-1/16-12 UNF -7 N/A (See PVP for PVG32) - - - - - - - - - - - - -8 Conversion kit open to closedand closed to open center155L5152 - - - - - - - - - - - -9 Orifice Ø1.0, bonded seal andplug for closed center- - - - - - - 1 1 1 1 1 1Service and Parts ManualPVG 16/32/128/256Service Parts54 | © Danfoss | October 2018 AX284661889190en-000101
PreviousNext |