Canon imagePROGRAF iPF810 User Manual

Also see for imagePROGRAF iPF810: Brochure Troubleshooting guide Brochure & specs Service manual

Contents

Canon imagePROGRAF iPF810 User Manual Manual pdf 659 page image

Cannot print over a networkConguring the Communication Mode ManuallyThis topic gives instructions for conguring the communication mode manually.1. Press the Menu button to display MAIN MENU.2. Press ▲ or ▼ to select Interface Setup, and then press the ► button.3. Press ▲ or ▼ to select Ethernet Driver, and then press the ► button.4. Press ▲ or ▼ to select Auto Detect, and then press the ► button.5. Press ▲ or ▼ to select Off, and then press the OK button.Return to the Ethernet Driver menu.6. Press ▲ or ▼ to select Comm.Mode, and then press the ► button.7. Press ▲ or ▼ to select the communication mode, and then press the OK button.Return to the Ethernet Driver menu.8. Press ▲ or ▼ to select Ethernet Type, and then press the ► button.9. Press ▲ or ▼ to select the Ethernet type, and then press the OK button.Return to the Ethernet Driver menu.10. Press ▲ or ▼ to select Spanning Tree, and then press the ► button.11. Press ▲ or ▼ to enable or disable spanning tree support, and then press the OK button.Return to the Ethernet Driver menu.12. Press the Online button.After the conrmation message is displayed, press OK.The new settings will take effect after the printer restarts.Troubleshooting 645