Main Power and Control Panel Power 1-251Before You Start Using This Machine1 Press and hold the control panel power switch for more than threeseconds.If the machine is in the Sleep mode, press the control panel power switch one time to cancel theSleep mode, and then press and hold the control panel power switch again for more than threeseconds.The job confirmation screen is displayed.IMPORTANTDo not initiate the Shutdown mode during fonts are being downloaded.NOTE• You can also force the machine into the Shutdown mode by pressing➞ [Common Settings]➞[Shutdown Mode].• You cannot force the machine into the Shutdown mode in the following cases:- When the machine is receiving and updating device information- When the machine is importing or exporting data using the Remote UI function• In a rare instance, the machine may not go into the Shutdown mode even if you press and holdthe control panel power switch for more than three seconds. In this case, follow the instructionson the touch panel display to turn OFF the main power.2 Confirm the jobs currently being processed or waiting to be processed➞ press [Start].Jobs continue to be processed until [Start] is pressed.To cancel the Shutdown mode, press [Cancel].If there are no current jobs, proceed to step 4.