Chapter 77-61b) I/O DISPLAYThe status of each sensor and switch is shown in the display.Sensor and switch status is shown in the display.ON = 1OFF or not used = 0Screen 1F-7-6Screen 2F-7-7Screen 1 and Screen 2 are selectable with the and keys.These screens display the associated sensor status as listed in the table below.T-7-118Displayposition Sensor name LCD display contents1 Pump Cam Sensor 0:Sensor ON, 1:Sensor OFF2 Valve Open/Closed Detection Sensor 0:Sensor ON, 1:Sensor OFF3 (Not Used) -4 (Not Used) -5 Spur Cam Sensor 0:Sensor ON, 1:Sensor OFF6 Lift Cam Sensor 0:Sensor ON, 1:Sensor OFF7 Feed Roller HP Sensor 0:Sensor ON, 1:Sensor OFF8 Top Cover Sensor 0:Cover open, 1:Cover close9 (Not Used) -10 Ink Tank Cover Switch 0:Cover open, 1:Cover close11 (Not Used) -12 Paper Detection Sensor 0:Sensor ON, 1:Sensor OFF13 (Not Used) -14 (Not Used) -15 (Not Used) -16 (Not Used) -17 Roll Media Sensor 0:Sensor ON, 1:Sensor OFF18 Roll Cam Sensor 0:Sensor ON, 1:Sensor OFF19 Cutter Lift Sensor 0:Sensor ON, 1:Sensor OFF20 Cutter Right Position Sensor 0:Sensor ON, 1:Sensor OFF21 Cutter HP Sensor 0:Sensor ON, 1:Sensor OFF22 (Not Used) -23 (Not Used) -24 (Not Used) -25 (Not Used) -26 Roll unit detection 0:Roll unit not detected, 1:Roll unit detected27 (Not Used) -28 (Not Used) -29 (Not Used) -30 (Not Used) -31 (Not Used) -32 (Not Used) -I / O D I S P L A Y 10 0 0 0 0 0 0 0 0 0 0 0 0 0 0 01 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16(Upper row)(Lower row)(Display position)I / O D I S P L A Y 20 0 0 0 0 0 0 0 0 0 0 0 0 0 0 017 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32(Upper row)(Lower row)(Display position)
