Canon UC800 Instruction Manual

Also see for UC 5000: Instruction manual

Canon UC800 Instruction Manual Manual pdf 2 page image

IntroductionImportant Usage InstructionsCAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVECOVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE.REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.WARNING:TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOTEXPOSE THIS PRODUCT TO RAIN OR MOISTURE.CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK AND TO REDUCEANNOYING INTERFERENCE, USE THE RECOMMENDEDACCESSORIES ONLY.CAUTION:CUSTOMERS IN THE U.K. SHOULD READ THIS BEFORE USING THISPRODUCT.CHANGING THE FUSETHE MAINS LEAD ON THIS PRODUCT IS FITTED WITH A NON-REWIREABLE (MOULDED)PLUG, INCORPORATING A 3 AMP FUSE. SHOULD THE FUSE NEED TO BE REPLACED ANASTA OR SS/APPROVED BS1632 FUSE OF THE SAME RATING MUST BE USED.ALWAYS REFIT THE FUSE COVER AFTER REPLACING THE FUSE. NEVER USE THE PLUGWITH THE FUSE COVER OMITTED.CHANGING THE PLUGIF THE FITTED PLUG IS NOT SUITABLE FOR YOUR SOCKET OUTLETS, IT SHOULD BE CUTOFF AND AN APPROPRIATE PLUG FITTED IN ITS PLACE. IF POSSIBLE FIT ANAPPROPRIATE 3 AMP FUSE. IF THE NEW PLUG HAS NO FUSE, THEN FIT A 5 AMP FUSE ATTHE DISTRIBUTION BOARD.AC POWER CORD CONNECTION (CA-R300B only)The wires in the mains lead of this apparatus are coloured in accordance with the following cord.(IMPORTANT)Mains Lead BLUE.NEUTRALBROWN.LIVEAs the colours of the wires in the mains lead may not correspond with the coloured markingsidentifying the terminals in your plug, proceed as follows: The wire which is coloured BLUE mustbe connected to the terminal which is marked with the letter N or coloured black. The wire which iscoloured BROWN must be connected to the terminal which is marked with the letter L or colouredred. Neither Blue wire or Brown wire is to be connected to the Earth pin of a 3 pin plug.THE SEVERED PLUG MUST BE DESTROYED IMMEDIATELY TO AVOIDANY POSSIBLE ELECTRIC SHOCK HAZARD.