140 List of Menu Options and MessagesList of Messages Displayed while a Direct Print FunctionCompatible Bubble Jet Printer is ConnectedThe following messages may appear on the camera’s LCD monitor while a directprint function compatible Bubble Jet printer (sold separately) is connected.On Bubble Jet Printers with operation panels, check the errornumber displayed on the panel and refer to the Bubble Jet PrinterQuick Start Guide.Printer in use Printer is busy printing from a memorycard in computer or printer. Printer willautomatically start printing from camerawhen the current print queue empties.Printer warming up Printer is warming up. When it is ready,the printer will start printing automatically.No printhead No printhead installed in printer.Printer cover open Secure the printer front cover.Media type error You selected a paper type incompatiblewith the printer. Select a compatiblepaper type in the Print Style menu.Paper lever error Adjust the paper thickness lever to theproper position.Low ink level Ink tank needs replacement soon.Prepare a new ink tank. Select [Continue]in the error message to resume printing.(This message will not appear on somemodels.)Waste tank full Restart printing by pressing RESUME/CANCEL button on printer, but requesta replacement waste ink tank from aservice center (see printer Quick StartGuide or the Contact List provided withthe printer) soon.Printer error Turn printer off and on again. If errorpersists, consult service center listed inprinter Quick Start Guide or in theContact List provided with the printer.
