9712345678CoverPreliminary Notesand Legal InformationContents: BasicOperationsAdvanced GuideCamera BasicsSmart AutoModeOther ShootingModesPlayback ModeSetting MenuAccessoriesAppendixIndexBasic GuideP ModeStill ImagesAdding Images to the Print List (DPOF)Batch printing (=99) and ordering prints from a photo developmentservice can be set up on the camera. Choose up to 998 images on amemory card and configure relevant settings, such as the number of copies,as follows. The printing information you prepare this way will conform toDPOF (Digital Print Order Format) standards.Still ImagesConfiguring Print SettingsSpecify the printing format, whether to add the date or file number, andother settings as follows. These settings apply to all images in the print list.zz Press the <n> button, and thenchoose [Print Settings] on the [2] tab.Choose and configure settings as desired(=31).Print TypeStandard One image is printed per sheet.Index Smaller versions of multiple images are printedper sheet.Both Both standard and index formats are printed.Date On Images are printed with the shooting date.Off –File No. On Images are printed with the file number.Off –Clear DPOFdataOn All image print list settings are cleared afterprinting.Off –• Not all of your DPOF settings may be applied in printing by theprinter or photo development service, in some cases.• [ ] may be displayed on the camera to warn you that the memorycard has print settings that were configured on another camera.Changing the print settings using this camera may overwrite allprevious settings.• Setting [Date] to [On] may cause some printers to print the datetwice.• Specifying [Index] will prevent you from choosing [On] for both [Date] and [FileNo.] at the same time.• The date is printed in a format matching setting details in [Date/Time] on the[3] tab, accessible by pressing the <n> button (=16).• Index printing is not available on some Canon-brand PictBridge-compatibleprinters (sold separately).