9212345678CoverPreliminary Notesand Legal InformationContents: BasicOperationsAdvanced GuideCamera BasicsSmart AutoModeOther ShootingModesPlayback ModeSetting MenuAccessoriesAppendixIndexBasic GuideP ModeStill Images MoviesPowering the Camera with Household PowerPowering the camera with AC Adapter Kit ACK800 and DC CouplerDR-DC10 (both sold separately) eliminates the need to monitor theremaining battery level.1 Make sure the camera is off.2 Open the cover.zz Follow step 1 in “Inserting the Batteries”(=14) to open the memory card/battery cover, and then open the couplercable port cover as shown.3 Insert the coupler.zz Insert the coupler as shown.zz Make sure the coupler cable passesthrough the port.A1400Coupler Cable Port4 Close the cover.zz Lower the cover ( ) and hold it down asyou slide it, until it clicks into the closedposition ( ).5 Connect the power cord.zz Insert the adapter plug into the end of thecoupler cable.zz Insert one end of the power cord into thecompact power adapter, and then plugthe other end into a power outlet.zz Turn the camera on and use it as desired.zz When finished, turn the camera off andunplug the power cord from the outlet.• Do not disconnect the adapter or unplug the power cord whilethe camera is still on. This may erase your shots or damage thecamera.• Do not attach the adapter or adapter cord to other objects. Doing socould result in malfunction or damage to the product.
