95Safety PrecautionsCleaning the machine Use a damp cloth to clean the machine. Never useflammable solvents such as alcohol, benzene or thinners.If flammable solvents come in contact with electricalcomponents inside the machine, it could cause a fire orelectric shock.Always unplug the machine from the power outlet before cleaning the machine.If you accidentally switch the machine on while cleaning it, you could injure yourself or damage themachine.Maintaining themachineDo not attempt to disassemble or modify the machine. There are no user serviceable parts insidethe machine.The machine contains high-voltage components. Never attempt any maintenance procedure notdescribed in this guide.Working around themachineDo not use highly flammable sprays near the machine.This could cause a fire or electric shock if the spray comes into contact with electrical componentsinside the machine.CautionYou may cause injury or damage the machine if you ignore any of these safety precautions.Choosing a location Do not install the machine in a location that is unstable or subject to excessive vibration.Do not install the machine in locations that are very humid or dusty, in direct sunlight, outdoors, orclose to a heating source.To avoid the risk of fire or electric shocks, install the machine in a location with an ambienttemperature range of 5°C to 35°C (41°F to 95°F) and humidity of 10% to 90% (condensation free).Do not place the machine on a thick rug or carpet.Do not place the machine with its back attached to the wall.Power supply Ensure that the area around the power outlet is kept clear atall times so you can easily unplug the power cord ifnecessary.Never remove the plug by pulling on the cord.Do not use an extension lead/cord.
