Canon PIXMA iP8500 Series Quick Start Manual

Also see for iP8500 - PIXMA Color Inkjet Printer: Supplementary guide Easy Setup instructions Quick start guide Service manual Service manual

Contents

Canon PIXMA iP8500 Series Quick Start Manual Manual pdf 75 page image

Troubleshooting71Problem Possible Cause Try ThisCannot Print toEnd of Job Incorrect page sizeis selected Ensure that the page size setting matches the size of the paper loaded in theprinter:z Check the Paper Size setting from within your application to ensure that itmatches the size of the paper loaded.z Check Paper Size on the Page Setup tab in the printer properties dialog box ofthe printer driver (Windows) or the Page Setup dialog box of the printer driver(Macintosh) to ensure that it matches the size of the paper loaded.There is not enoughfree space on thehard diskYour operating system may be out of free disk space.Check the available space on your computer’s hard disk.The size of the printdata is too large Check the size of the print data. For Windows XP and Windows 2000, if the size ofthe data is too large, part of it may be lost. When the spool format is EMF, followthe procedure below.1. Open the printer properties dialog box.2. On the Main tab, click Print Options.3. Select the Reduce spool data size check box, and click OK.When Reduce spool data size is set, the print quality may bedegraded.Use reducedprinting is notselected whenperformingautomatic duplexprintingIn automatic duplex printing, the printable area at the top of the page is 2 mm/0.08 inches narrower than the usual area, therefore the bottom edge may not beprinted. To prevent this, select Use reduced printing in the printer driver.Print layout may be altered with the reduced printing function.1. Open the printer properties dialog box.2. Click Print Area Setup in the Page Setup tab and select Use reduced printing.1. In the Print dialog box, select Duplex Printing & Margin from the pop-up menu.2. Select Automatic Duplex Printing, and select Use reduced printing in PrintArea.