Advanced Guide > Printing Photographs Directly from a Compliant Device or a Wireless Communication Device > PrintingPhotographs from a Wireless Communication Device > Printing via Bluetooth CommunicationPrinting via Bluetooth CommunicationThis section describes the procedure to print photos through Bluetooth communication from a mobilephone with the optional Bluetooth Unit BU-30.When printing from a mobile phone through Bluetooth communication, refer also to your product'sinstruction manual.For the procedure to print through Bluetooth communication from the computer, refer to About BluetoothCommunication .NoteMobile phones supporting OPP (Object Push Profile) or BIP (Basic Image Profile) can print photos.Depending on your mobile phone, you may not perform printing even if your mobile phone supportsthe profiles above. For information on the profiles your mobile phone supports, refer to yourproduct's instruction manual.Printing through Bluetooth Communication1. Make sure that the machine is turned on.2. Load paper on the Rear Tray.3. Attach the optional Bluetooth Unit BU-30.Insert the Bluetooth Unit BU-30 to the Direct Print Port.4. Set the page size and layout.Setting the Page Size, Media Type, and Layout When Printing from a Mobile Phone5. Start printing from a mobile phone.For the device name, select the default value Canon XXX-1 (where "XXX"is your machine's name).If you are required to input a passkey, input the default value "0000".You can change the device name of the machine, passkey, and so on from thePage 624 of 805 pagesPrinting via Bluetooth Communication