Click OK when the confirmation message appears.When a message prompting you to change the media type appears, select a mediatype from the list and click OK.3. Check the paper sizeCheck the Page Size list. When you want to change it, select another page size fromthe list. The list displays only sizes that can be used for borderless printing.4. Adjust the amount of extension from the paperIf necessary, adjust the amount of extension using the Amount of Extension slider.Moving the slider to the right increases the amount extending off the paper, andmoving the slider to the left decreases the amount.It is recommended to set the slider at the second position from the right for mostcases.ImportantWhen the Amount of Extension slider is set to the rightmost position, the backside of the paper may become smudged.5. Complete the setupClick OK.When you execute print, the data is printed without any margins on the paper.ImportantWhen a page size that cannot be used for borderless printing is selected, the size isautomatically changed to the valid page sizes for borderless printing.When Borderless is selected, the Printer Paper Size, Duplex Printing, StaplingSide settings, and the Stamp/Background... (Stamp...) button on the Page Setup tabappear grayed out and are unavailable.When Envelope, High Resolution Paper, or T-Shirt Transfers is selected from theMedia Type list on the Main tab, you cannot perform borderless printing.Depending on the type of the media used during borderless printing, the print qualitymay deteriorate at the top and bottom of the sheet or stains may form.When the ratio of the height to the width differs from the image data, a portion of theimage may not be printed depending on the size of the media used.In this case, crop the image data with an application software according to the papersize.21
