PhotoScans the original on the platen glass as a photo data applying the settings specified in Scansettings.B. Tap to display Scan settings screen.For more on the setting items:Setting Items for Scanning Using Operation PanelC. Tap to register the current scan settings as a custom setting.Registering Favorite Settings (Custom profiles)D. Tap to display the screen to select the destination.7. Load original document on platen glass or in ADF.8. Press Color button for color scanning, or Black button for black & white scanning.Note• If the original is not loaded properly, a message is displayed on the touch screen. Load the originalon the platen glass or in the ADF according to the scan settings.• If you load the original in the ADF:The printer starts scanning and scanned data is forwarded to the computer and attached to an e-mail.• If you load the original on the platen glass:◦ When you select JPEG for Format on the scan setting screen, the printer starts scanning andscanned data is forwarded to the computer and attached to an e-mail.◦ When you select PDF or Compact PDF for Format on the scan setting screen, theconfirmation screen asking you if you continue scanning is displayed after scanning iscomplete.If you continue scanning, load the original on the platen glass and start scanning.If you do not continue scanning, tap End. The scanned data is forwarded to the computer.Scanned data is forwarded to the computer and attached to an e-mail according to the settingsspecified in Canon IJ Scan Utility.For the settings or how to send an e-mail, refer to the mail software's instruction manual.701
