Canon Inner Finisher-D1 Installation Procedures Manual

Also see for Inner Finisher-D1: INSTALLATION PROCEDURE

Canon Inner Finisher-D1 Installation Procedures Manual Manual pdf 2 page image

22How to Utilize This Installation ProcedureWhen Using the parts included in the packageA symbol is described on the illustration in the case of using the parts included in the packageof this product.Packaged ItemSymbols in the IllustrationThe frequently-performed operations are described with symbols in this procedure.ConnectorDisconnectScrewTighten Remove Connect Secure FreeHarnessPushInsert Plug in Turn onSound CheckCheck Visual CheckClawRemoveChecking instructionConfirmation Before the InstallationCautions at the Installation1. Check that the main power switch is OFF.1) Turn OFF the main power switch of the host machine.2) Be sure that Control Panel Display and Main Power Lamp are both turned OFF, and thendisconnect the power plug.12NOTE:• When installing the Additional Tray-A1 at the same time, install it in the inner finisherprior to the installation of the Inner Finisher-D1. For the additional tray installation, referto the installation procedure contained in the Additional Tray-A1 carton.• When installing the USB Device Port-D1 at the same time, install it in the host machineprior to the installation of the Inner Finisher-D1. For the USB device port, refer to theinstallation procedure contained in the USB Device Port-D1 carton.F-1-2