1082 Press the button.• The camera will switch to Color Inputmode and the display will alternatebetween the original image and thecolor swap image (using thepreviously set color).3 Aim the camera so that the original colorappears at the center of the LCD monitor andpress the button.• Only one color can be specified.• Use the or button or turn the control dial to specify therange of colors that are swapped.4 Aim the camera so that the desired colorappears at the center of the LCD monitor andpress the button.• Only one color can be specified.5 Press the button to complete the setting,then shoot.z The default setting for Color Swap mode changes green intowhite.z You may not obtain the expected results if you use the flash.z The colors specified in the Color Swap mode and the colorrange are retained even if the camera’s power is turned off.–5: Only takes the color that you want to swap+5: Also takes colors close to the one that you want to swap
