Chapter 22-5- Shared printer needs to have DIAS (Service) installed on printer server.The installation of DIAS (Service) must be done via Driver installer.Shared printer means a printer whose Spooler (Print queue) appears on the printer server (Remote PC).- However, in some cases, DIAS (Service) needs to be installed for Local Port connection. (See "Help" >"Troubleshoot the acquisition of configuration information".1, WinNT4.0 OS Family (All)/ At the time of Local Port connection (LPT)2, Win2k Server OS Family (Except Professional)/At the time of Local Port connection (LPT/USB) and TerminalService introduction3, WinXP Home/Professional Edition/ServerOS 2003 Family (X86:All)/ At the time of Local Port connection (LPT/USB) and Terminal Service introductionAbout the version indicationThe same Driver version indication as the one via Netspot Suite Service appears only when communicating withDevice via DIAS (Service) (i.e., when connected through a shared printer).Compatibility of DIAS and Netspot Suite ServiceDIAS and Netspot Suite Service are compatible and independent. Driver supporting DIAS does not use Netspot SuiteService even if it is installed.Cautions when using DIASCBT controls all access to Local Port; both DIAS (DLL/Service) and NetSpot Suite Service use CBT to access LocalPort from the same PC.CBT was installed only on Netspot Suite Service before; it is automatically uninstalled in response to uninstallingthe existing NetSpot Suite Service. Follow the procedures below when uninstalling the former versions of NetSpotSuite Service v3.40 and when uninstalling JobMonitor v4.20 and former.- Reinstall DIAS after the uninstallation is complete. (Reinstallation of DIAS is enabled via Installer.)- Update NetSpot Suite Service to the latest version (v3.40 and later).Former versions of NetSpot Suite Service v3.40PS Printer Driver v2.10 and formerPCL5e Printer Driver v6.11 and formerPCL5c Printer Driver v6.11 and formerPCL6 Printer Driver v6.11 and formerUFR Printer Driver v1.10 and formerJobMonitor v4.10 and formerAbout a file name of the CBT moduleFollowing files are installed in the 'c:\Windows\system' folder. (For Windows XP/Windows 2000/NT/Server2003,this folder name is to be '%SystemRoot%\system32'.)AuPort.exe