Canon Color Network Printer Unit-D1 Installation Procedure

Also see for Color Network Printer Unit-D1: Service bulletin

Contents

procedura di installazione

Canon Color Network Printer Unit-D1 Installation Procedure Manual pdf 3 page image

– 3 –2 Installation2.1 Before Starting the Work• Host Machine’s Service ModeMake the following selections in service mode, andset the item to ‘3’: COPIER>OPTION>INT-FACE>IMAGE-CONT (so that the IP address usedfor communication between host machine and theserver unit will automatically be set up).• Make sure that the site of installation meets the fol-lowing spatial requirements:Fig. 2-12.2 Installing to the Host MachineBefore stating the work, be sure to gothrough the following in strict order onthe host machine:1. turn off the control panel powerswitch.2. turn off the main power switch.3. disconnect the power cable (of thewall outlet).Fig. 2-21) Open the cable clamp [1] of the host machine’s up-per rear cover.2) Disconnect the connector [2], and disconnect theDDIS cable [3].Fig. 2-33) Remove the 7 screws [1], and detach the upper rearcover [2].Fig. 2-420 cm min.(rear)Machine(front)Host machine[1][2]OFFOFF[3] Disconnect[1][2][3][2][1][1][1][2]