Canon CR-DGi User Manual

Canon CR-DGi User Manual Manual pdf 25 page image

21Save folder: This selects the save folder. Click the button at right end to select the save folder. In the defaultsetting, a Save folder is created under the Installation folder.Image quality: This sets the image quality of JPEG files. The default setting is 96. The setting range is 80 to100. Larger values provide in higher image quality, but also result in larger image sizes.Image size: This selects the pixel size of JPEG files. The Original setting saves that image at the same size asthe captured image. The 3072, 2160, and 1440 settings indicate the pixel width, and the aspectratio of the image is not changed. The default setting is Original.Date order: This sets the format of the date folder.Save option: Although the image is saved as a JPEG file under the standard settings, when a checkmark isinserted in this option, the BMP file and the original file before image adjustment are saved atthe same time. BMP files are saved as BXXXX.bmp, and original files are saved asRXXXX.crw(jpg). The ³XXXX´ portion is the same number as the JPEG file.Limit for displaying message: A warning will be displayed when the storage capacity of the disk where Savefolder is stored becomes lower than the value set here. The default setting is 500(MB).Item1: This defines the ³Note1´ label in the Study Information. Up to 12 bytes of alphanumeric characters canbe entered. In some system fonts, the character width is large, or some characters are not displayed.Therefore, be sure to check the displayed information at the Information screen.Item2: This defines the ³Note2´ label in the Study Information.Item3: This defines the ³Note3´ label in the Study Information.Item4: This defines the ³Note4´ label in the Study Information.