2EnFrDeItEsCaEuPtElDaNlNoSvFiRuUkLvLtEtPlCsSkSlHrHuRoBgTrArFaSpecifying the BasicSettingsWhen you turn on the machine for the first time, the SetupGuide appears on the operation panel. Perform the initialmachine setup by following the on-screen instructions.Operation panel1. Select the language, the country or region,and then the time zone.2. Set the current date/time.Specifying the SecuritySettingsTo prevent unauthorized access to the machine, set accessrestrictions for Remote UI.What is Remote UI?Remote UI allows you to use your computer’s Webbrowser to check the machine’s operating statusand change settings.1. To use the Remote UI, select .To continue without using the Remote UI, select and proceed to step 3 .2. To use System Manager mode, select .• Set the System Manager ID and PIN so that youcan configure the settings for extended functionsand the management of access privileges, etc.• To continue without using System Managermode, select and proceed to step 5.3. Set the System Manager ID.Enter any number and then select .4. Set the System Manager PIN.• Enter any number and then select .• Re-enter the same PIN on the next screen asconfirmation and select .5. To use General User mode, select .• Set the PIN to be used by general users to accessthe Remote UI.• To continue without using General User mode,select and proceed to step 3 .6. Set the Remote UI Access PIN.• Enter any number and then select .• Re-enter the same PIN on the next screen asconfirmation and select .Specifying the NetworkSettingsSpecify the settings for connecting the machine to anetwork. Before proceeding, check that the computer androuter are correctly connected to the network.• You cannot use a wired LAN and a wireless LAN at thesame time.Wireless LAN1. Check the router's "SSID" and "Networkkey."SSID : XXXXXXXXXXXXNetwork key : XXXXXXXXXXXX2. To configure the settings, select onthe operation panel.3. Select the network with a matching SSID.4. Enter the password (network key) and select.123Configuring the Initial Settings
|
