62 VideoOptions ( Default value in mode)NOTES• If the degree of camcorder shake is too high, the image stabilizer maynot be able to fully compensate.• Powered IS is not available in mode.• For surveying and following shots, when you pan the camcorder fromside to side or tilt it up and down, we recommend setting the IS modeto [P Dynamic] or [Q Standard].[P Dynamic] ( mode only) Compensates for a higherdegree of camcorder shake, such as when shooting while walk-ing, and is more effective as the zoom approaches full wideangle.[Q Standard], [Q On] Compensates for a lower degree ofcamcorder shake, such as when shooting while remaining sta-tionary, and is suitable for shooting natural-looking scenes. Usethis setting when recording movies with the optional Wide-con-verter or Tele-converter.[j Off] Use this setting when the camcorder is mounted on a tri-pod.Powered ISWhen shooting video, you can use Powered IS to make the imagestabilization even more powerful. Powered IS is most effective whenyou are stationary and zooming in on far subjects using high zoomratios (the more you approach the telephoto end). Holding the LCDpanel with your left hand will add to the stability of the shot.Press and hold Y as long asyou want to activate Powered IS.• Z appears in yellow, whilePowered IS is activated.• You can change the operation of theY button (long press ortoggle on/off) with the 7 8[POWERED IS Button] setting.
