Dual Shot Mode 452 When you wish to resume recording, open the LCD panel.• The ON/OFF (CHG) indicator turns back green and the camcorder isready to record.• b You can also pull out the viewfinder to start recording with theLCD panel closed. Restore the viewfinder to its original position toset the camcorder to standby mode.IMPORTANT• Do not disconnect the power source during standby mode (while theON/OFF (CHG) indicator is lit in orange).NOTES• The camcorder will not enter standby mode if the LCD panel is closedwhile the ACCESS indicator is on or flashing, while a menu is being dis-played, or while the viewfinder is pulled out (b only). The camcordermay also not enter standby mode if the LCD panel is closed while thedouble memory card slot cover is open or when the battery charge istoo low. Check that the ON/OFF (CHG) indicator changes to orange.• About standby mode and auto power off:- The camcorder will power off automatically if left in standby mode for10 minutes. Press x to turn on the camcorder.- You can select the length of time until shut-off or turn off the QuickStart function altogether with the 68 [Power Saving Mode] 8[Quick Start (Standby)] setting.- The usual 5-minute auto power off setting of [Power Saving Mode] isnot applicable while the camcorder is in standby mode.• Changing the position of the mode switch while the camcorder is instandby mode will reactivate the camcorder in the operating modeselected.
