4. Click Face Sharpener.NoteEffect levels can be changed using the slider below Face Sharpener.5. Click OK.The face is sharpened and the (Correction/Enhancement) mark appears on the upper left of theimage.NoteClick (Compare) to display the images before and after the correction side by side so thatyou can compare and check the result.Click Reset Selected Image to undo the correction operation.If you want to apply the correction to all the selected images at once, select the Apply to allimages checkbox.Manual Correction3. Click Manual, then click Correct/Enhance.4. Click Face Sharpener.NoteEffect levels can be changed using the slider below Face Sharpener.Move the cursor over the image. The shape of the cursor changes to (Cross).5. Drag to select the area you want to correct, then click OK that appears over theimage.Page 234 of 1086 pagesUsing the Face Sharpener Function
