Barracuda F100 Quick Start Manual

Barracuda F100 Quick Start Manual Manual pdf 3 page image

Barracuda CloudGen FirewallBarracuda NG Firewall F100 / F101 3 / 4Green SteadyInstallation was completedsuccessfully, appliance is halted forreboot or installation was not yetinitialized far enough for LEDcontrol.Barracuda NG Firewall is up and running.Red Blinking Error during installation.An error has appeared preventingBarracuda NG Firewall from entering theup state.If no orange light available: appliance isin ART mode.Red Steady - Appliance is halted and may bedisconnected.Orange Blinking - -Orange Steady - Appliance is in ART mode.Not all appliances support orange and/or red LED colors. Depending on the appliance type, thestatus LED might be on by default and it might take some time during boot and installation tostart either blinking or changing the color. Furthermore, the status LED might blink at differentfrequencies.Serial Console PortIn order to establish a console connection to the appliance using a serial cable (Revision A: DB9,Revision B: RJ45), you need to configure the serial port on the terminal using the followingparameters:Parameter ValueBaud 19200Bits 8Stop bit 1Parity NoneHandshake None

/ 4

Related manuals for Barracuda F100