Barco KVD User Manual

Barco KVD User Manual Manual pdf 15 page image

3. Network integrationThe addresses in the DCHP Permanent IP table are only valid / active after they had beenadded to the DHCP server configuration table and after the DHCP server has beenrestarted.Restarting the DHCP server is done by clicking Apply on the page Wall DHCP.The command Add inserts a new blank record into the permanent IP table. This allows entering the MAC addressand the IP address from scratch.The command Delete removes a record from the permanent IP table.Add and Delete affect the table on the web page only.The entries of the table are written to the DHCP server configuration table only in case Apply has been clicked.This command restarts the DHCP server. A request to reboot the projection modules is displayed.Barco - Barco Wall Control Manager OVD/KVD/IVD - R591337 - user manual - Revision 04 - March-2016 _______________________________________________ 15