AeroPlus Sbach 342 Manual

AeroPlus Sbach 342 Manual Manual pdf 2 page image

www.aeroplusrc.com service@aeroplusrc.comAeroPlus RC Copyright 2013 © All Rights ReservedUnpackingCarefully unpack the model making sure that if you use a sharp knife to open bags, not to cut any covering on themodel. Inspect each item to make sure no transit damage has happened. If you are not happy with any part orare unsure please contact the Dealer that you purchased from.CoveringDue to the model spending time in different climates zones from the factory on its way to you, some of thecovering may have wrinkles. We highly recommend that you take time to re‐seal all covering edges with an ironand to use a heat gun to remove any wrinkles and re‐tighten the covering. It is best to do this now while the planeis not assembled, remember to not let any heat get near any parts like the canopy or cowl as this may causedamage.Assembly TipsWe also recommend that you go over all the accessible joints with cyano glue. Wick glue into areas of high stressaround the U/C plate and motor box.Use Nutlock on all metal to metal joints. Even if you are using electric with low vibration levels it will make surethat things do not drop off your airplane!!