www.aeroplusrc.com service@aeroplusrc.comAeroPlus RC Copyright 2013 © All Rights Reserved88‐125cc Corvus Racer 540Congratulations on your purchase of your new AeroPlus Rc Corvus Racer 540. Thisplane has been designed to be one of the lightest and highest performance aerobaticsplanes anywhere. We hope that you will enjoy this plane and will exceed yourexpectations in what a model airplane can be.Thank you,AeroPlus RcUnpacking ‐Carefully unpack the model, when opening the plastic bags make sure you do not to cut any covering onthe model. Inspect each item to make sure there was no damage in shipping. If for any reason you arenot happy with any part or are unsure please contact the Dealer that you purchased from.Covering ‐Because of the multiple climate zones encountered on the trip from the factory to you,some of the covering may have wrinkles. We highly recommend that you take time to re‐seal all covering edges with an iron and to use a heat gun to remove any wrinkles and re‐tighten the covering. It is best to do this now while before the plane is assembled.*Note: Be careful not let any heat get near parts like the canopy or cowl as this may causedamage.Assembly TipsWe also recommend that you go over all the accessible joints with cyano glue. Wick glueinto areas of high stress around the U/C plate and motor box.Use a quality Thread‐lock on all metal to metal joints. Even if your model is electricpowered with lower levels of vibration the thread‐lock will ensure that things do not falloff of your airplane!!