First things firstSetting up the Acer p700 Series Portable Navigator in your vehiclexvi5 Dock the device on the car holder.6 Dock the device with holder on the car mount which has been mounted to yourwindscreen then adjust the car mount for the best viewing angle.7 After setting up the device on the car mount, connect the car charger. The powerLED indicator lights up orange during charging.NOTE: If the car engine is turned off, you may be required to switch the vehicle ignition backinto the Accessories position. Consult your vehicle owner's manual.NOTE: The device comes with the battery pre-charged to at least 30 percent capacity. You canstart using it once it is mounted in your vehicle and connected to the cigarette lighter.However, for maximum usage time you need to charge your device to full capacity. Go to"Recharging the Acer p700 Series Portable Navigator" on page 8 for instructions.+ +