Acer p700 Series Portable Navigator setupviiiAcer p700 Series Portable Navigator setupUsing your newAcer p700 Series Portable Navigator for the first time is a snap.Unpack, turn on, mount and you’re ready to go. Perform the following easyinstallation tasks to start using the device straight out of the box:1. Unpack the device.2. Set up the device in your vehicle.NOTE: You should not use the power switch again unless you want to do a hard reset. See"Performing a hard reset" on page 54 for more information. Instead, use the power buttonat the top of the device (see diagram below).