Menu
Contents
|  First things firstStart up the Acer p600 Series Portable NavigatorxviiiStart up the Acer p600 Series Portable NavigatorBefore mounting the Acer p600 Series Portable Navigator on your vehicle, you shouldfirst calibrate the screen. After screen calibration, proceed to system settingsconfiguration.To turn on and calibrate the device:1 Turn on your device for the first time by sliding the power switch to the right. Thepower switch is located at the bottom of the device. See "Top and bottom views" onpage x if you have any difficulty finding this switch.When you first turn on your device, you will be asked to calibrate the screen. This processensures that when you tap the screen the item tapped is activated.2 Follow the instructions on the screen.After calibrating the screen, the Main Menu screen displays. This is also referred to as theHome screen.To configure system settings:If you intend to start using your Acer p600 Series Portable Navigator at once, werecommend that you configure the language and date/time settings first. The rest ofthe user preferences can be set up later.1 Tap Settings on the Main Menu panel.2 To set the system language settings, tap Language.• Tap the down arrow beside the Text and Voice settings and choose thelanguage you prefer.3 To set the system date and time, tap Date/Time.4 Tap Date.• Tap + or - beside the Year, Month, and Day settings to set the date values.5 Tap Time.• Tap + or - beside the Hour and Minute settings to set the time values.NOTE: After powering your device on for the first time, you should not use the power switchunless you want to do a hard reset. See "Performing a hard reset" on page 33 for moreinformation. Instead, use the power button at the top of the device. |
Questions and answers
Need help?
Ask question about this manual
Related manuals for Acer p600 Series
Product
Learn More
Legal
Copyright © 2025 OneStart. All Rights Reserved