First things firstSet up the Acer p600 Series Portable Navigator in your vehiclexvii5 Dock the device on the car holder.6 Adjust the car mount for the best viewing angle.7 After setting up the device on the car mount, connect the car charger.The power LED indicator lights up orange during charging.NOTE: If the car engine is turned off, you may be required to switch the vehicle ignition backinto the Accessories position. Consult your vehicle owner’s manual.NOTE: The device comes with the battery pre-charged to at least 30% capacity. You can startusing it once it is mounted in your vehicle and connected to the cigarette lighter. However,for maximum usage time you need to charge your device to full capacity. Go to "Rechargingthe Acer p600 Series Portable Navigator" on page 5 for instructions.