33Parameter Description OptionsVirus Warning This feature allows you to enable the VIRUSwarning function for IDE Hard Disk boot sectorprotection. If this function is enabled and thereis someone attempts to write data to this area,BIOS will show a warning message on screenand the alarm will beep.[Enabled], [Disabled]Quick PowerOn Self TestThis feature allows the system to skip certaintests while booting. When this function isenabled, it will decrease the time needed to bootthe system, which means to quick power onself-test function.[Enabled], [Disabled]Silent Boot This feature allows you to enable or disable if thescreen logo to display or not during POST[Enabled], [Disabled]First/Second/Third BootDeviceThe item allows you to see the sequence of bootdevice where BIOS attempts to load the diskoperation system.[Floppy], [LS120],[Hard Disk],[CD-ROM], [ZIP],[USB-FDD],[USB-ZIP],[USB-CDROM],[USB-HDD], [LAN],[Disabled]Boot FromOther DevicesThis item allows user to enable or disable to bootfrom other device[Enabled], [Disabled]Boot UpNumLockStatusThis item allows user to enable or disable to setkeyboard is number keys or arrow keys[Enabled], [Disabled]SecurityOptionThis category allows you to limit access to thesystem and Setup, or just to Setup.[System], [Setup]APIC Mode This option is used to set up enable or disablethe APCI function[Enabled], [Disabled]HDDS.M.A.R.TCapabilityS.M.A.R.T. which allows your hard disk to reportany read/write errors and issue a warning whenLDCM installed[Enabled], [Disabled]