Getting Started1-31.1.3 Preparing the System UnitDo the following to begin setting up the system:1. Unlock the front wheels and move the system to your desiredsite.The system housing design allows for easy transport in spite ofits size. It comes with four wheels that facilitate short-distancetransits. The two front wheels each include a lever to lock thewheels after you have positioned the system into place.2. After moving, lock the wheels by pressing down the levers.Make sure to unlock the wheels when you wantto move the system again.3. Connect the system power cable into the power supply moduleson the rear panel. See section 2.5.UnlockLockFront Wheel Lever