Acer AT4250B series Quick Start Manual

To connect a DVD player to the Acer AT4250B series TV using the composite inputs, use the AV3 port. Connect the yellow (Y) cable to the yellow input, the red (R) cable to the red input, and the white (W) cable to the white input on the TV.

The Acer AT4250B series TV offers several types of inputs, including COMPOSITE, S-VIDEO, D-Sub, HDMI, COMPONENT, and AUDIO. These inputs allow you to connect various devices such as DVD players, VCRs, and set-top boxes (STBs).

To start the initial setup, plug in the tuner coaxial cable and then press the 'OK' key on the remote.

The channel scan may take a while to complete. You can monitor the progress with the status message 'Scanning.' and the percentage completion. If it seems to be stuck, ensure that the coaxial cable is properly connected and try restarting the setup process.