Upgrade Firmware, ContinuedUpdating Your ARMC/2’s Firmware, ContinuedStep Description7 Once it verifies the image, the following dialog box appears:Left click the OK button.8 If the dialog box prompted that an update is necessary, left click the Flash button. If the wizarddetermined that no flash is necessary, you can left click the Cancel button.Note: Even if you choose to cancel the firmware flash operation, the ARMC/2 must be reset. Thismeans that you must close the Internet browser and log back onto the ARMC/2 before you canperform any other types of operations.Note: You can place a check next to Preserve Config if you want to flash the firmware but retain youroriginal configuration.9 Left click the OK button.Cont’dChapter Four : Using Your ARMC/2 79