Remote ConsoleRemote Console is a subsection of the Manage group. The following table describes theinformation listed in this subsection in detail:Item DescriptionHigh Color Quality(16-bit) for fast/LANConnectionThis option allows the ARMC/2 to send 16 bits per pixel color.This setting is recommended for faster connection speeds or overa LAN connection.Low Color Quality(8-bit) for fast/LANConnectionThis option allows the ARMC/2 to send 8 bits per pixel color.This setting is recommended for lower connection speeds or overa WAN connection.When using Low Color Quality (8-bit) for fast/LAN Connection,you can opt not to use software compression. Compression canincrease the frame rates. Best used for slower connections.Low Color Quality(8-bit) forslow/WAN/DSLConnectionThis option allows the ARMC/2 to send 8 bits per pixel color.This setting is recommended for lower connection speeds or overa WAN connection.When using Low Color Quality (8-bit) for slow/WAN/DSLConnection, you can also use software compression. Compressioncan increase the frame rates. Best used for slower connections,such as DSL.Note: The Low Color Quality (8-bit) for slow/WAN/DSL Connection mode is recommended forlow speed connections such as those over a Wide Area Network or home DSL. If you areconnecting over a LAN at high speeds you can use High Color Quality (16-bit) forfast/LAN Connection mode. In order to change modes you must stop redirection, closethe browser, and reconnect in the appropriate mode.Chapter Four : Using Your ARMC/2 43