IP Address Range, ContinuedNote: The Start and End IP addresses can be the same if you only wish to scan for one ARMC/2card with that specific IP address.When you have finished entering all the IP address ranges to be scanned, make sure thatthey appear correctly in the list box. Confirm that the checkbox next to the IP range youwant to search is checked.At this point, you have two options. You can choose to run the scan immediately by leftclicking on the Next button.The name and IP range of the ARMC/2 card will display in the Selected IP Rangewindow. Left click on the Next button.Cont’dARMC/2 User’s Guide36