Step 8 Connect to the ARMC/2 from a Client System, ContinuedStep Description3 Type in your Network Name. In this example, Your Network Name is the Network Name. Next,you must enter a range of IP addresses that you want to search. In this example, the ARMC/2card’s IP address is between 172.16.2.200 to 172.16.2.255. Left click the Add>> button whenfinished.4 The name and IP range of the ARMC/2 will display in the right field. Place a check in the box nextto the range of IP addresses. Left click on the Next button.Cont’dARMC/2 User’s Guide24