Step 2 Plug in the ARMC/2 Card into the Host System and Attach InternalCables, ContinuedJP4 and JP5 Chassis/Motherboard Power SwitchJP4 and JP5 can be used in place of the ARMC/2 Universal Cable to power on, power off,and power cycle the motherboard.Connect a two pin cable from the motherboard’s Power (Soft On/Off) header to JP4 onyour ARMC/2 card. Connect the chassis power switch to JP5 on your ARMC/2 card.Note: JP4 and JP5 can be used in place of the ARMC/2 Universal Cable to power on, poweroff, and power cycle the motherboard.JP6 ARMC/2 Reset ButtonYou can short this jumper to reset your ARMC/2 card.Pin Description1 Ground2 Reset #JP7 and JP8 Chassis/Motherboard Reset SwitchJP7 and JP8 can be used in place of the ARMC/2 Universal Cable to reset themotherboard.Connect a two pin cable from the motherboard’s Reset header to JP7 on your ARMC/2card. Connect the chassis reset switch to JP8 on your ARMC/2 card.Note: JP7 and JP8 can be used in place of the ARMC/2 Universal Cable to reset themotherboard.Step 3 Connect External Cables• Connect the USB cable from the back of the ARMC/2 card to the motherboard’sUSB port.• Connect your VGA monitor to your ARMC/2 card.• Connect the RJ45 LAN cable from your local network to your ARMC/2 card.• Connect your AC adapter. (Only if the AC Adapter is part of your ARMC/2 kit)Cont’dARMC/2 User’s Guide10