Cannot Power On the Host System RemotelyProblemCannot remotely power on, power off, or power cycle the host system.SymptomWhen connected to the ARMC/2 remotely (using the GUI), power on, power off, andpower cycle does not work properly.SolutionThe user should make sure that the feature cable is connected properly from the ARMC2card and the host system’s main board and chassis. The wall AC adapter must beconnected to the ARMC/2 card in order for power control options to operate properly.Complete FlashProblemDeciding whether to do a Complete flash instead of selecting individual modules during afirmware upgrade.SymptomAfter flashing the new firmware to the ARMC/2, there are unexpected errors.SolutionWhenever there is a change in Config section of the new firmware image, the user mustperform a Complete flash. Otherwise the default selected modules are sufficient forflashing.Appendix D : Troubleshooting 135
