ARMC2ConfigApp, ContinuedStep Description3 If you are running the ARMC2ConfigApp program from a remote system, select the second radialbutton labeled ‘I want to connect to a ARMC2 on the network’. Type in the ARMC/2 card’s IPaddress in the field to the right of Card IP. Type in your user name and password in theappropriate fields and left click on the Ok button.Note: You must know the ARMC/2 card’s IP address before running the ARMC2ConfigAppprogram from a remote system. Run the ARMC2Seek program to find the ARMC/2 card’s IPaddress.4 The following ARMC2ConfigApp Dialog window appears:The ARMC2ConfigApp Dialog window allows you to manage users, configure the network, flashthe ARMC/2 card’s firmware and perform advanced configurations.Cont’dARMC/2 User’s Guide114