AcerRouter 700 Series User Guide 6-15address if you have changed it). You will see the following prompt:Manager Console Version: Please enter your password:Enter the current password (which is the same as the browser password) and thecommand prompt displays.Command>Connecting to the CLI Through the Console PortAnother way to invoke the command line interface is to use the console port on theAcerRouter 700 to connect to a PC running the terminal software. In the box, you’llfind a null modem cable that you can use to connect your PC (usually the COM2 port)to the AcerRouter 700 console port.Connect to the CLI with a terminal program such as Hypercritical or Proclaim. Setyour COM port parameters to 19200, N, 8, 1, with hardware flow control disabled. Ifyour program does not allow you to set flow control options, set it in the DeviceManager area of the Windows System settings (accessible from the Control Panel).Note that after configuring these settings, some programs require that you close theapplication and re-open it.Enter a carriage return to start your session, and you’ll see the following prompt:Manager Console Version: Please enter your password:Enter the current password (which is the same as the browser password) and thecommand prompt displays.Command>For more information about the CLI, see the CLI User’s Guide located on your AcerNetxus CD-ROM.
