Menu
Acer 700 Series User Manual
Contents
|  4 AcerRouter 700 Series User GuideNote: If you set Call Direction to Incoming Only, the My System Name andMy System Password fields do not display. If you set Call Direction toOutgoing Only, the Remote System Name and Remote System Passwordfields do not displayMy System Name: the name that the remote system will use to recognizeyour network.My System Password: the password the remote system will use toauthenticate your systemNote: Make sure the VPN Connection Profile at the remote site is configuredwith your System Name and System Password.Remote System Name: the name of the remote network that is dialing in.Remote System Password: the password that your AcerRouter 700 willexpect to see from the remote system.VPN Tunnel: the VPN Tunnel (set up earlier) you will use for this profile.This is one of the tunnel configurations set up earlier.Step 11 Click APPLY and TEST when you are done, or select Advanced to enteradvanced options.Advanced Options for VPN ProfilesNote: The IPX options shown in this screen only appear if you selected ShareNetWare (IPX) Resource on the SMART Configuration screen.Step 1 Enter the following information:Connection Profile ConfigurationCANCEL OK(Optional) Remote IP Address(Optional) Remote IP Netmask(Optional) Remote IPX Network NumberRemote Office Access by VPNEnable IP Yes No. . .. . .Encryption keyIPX RIP/SAP Enable DisableEnable IPX Yes NoSet as IPX Default Route Yes NoEnable Encryption DES NoEnable Bridging Enable DisableConfirm Encryption key |
Questions and answers
Heed help?
Ask question about this manual
Related manuals for Acer 700 Series
Product
Learn More
Legal
Copyright © 2025 OneStart. All Rights Reserved