Menu
Acer 700 Series User Manual
Contents
|  6-2 AcerRouter 700 Series User GuideStep 3 Enter the following information:Tunnel Name: a name by which you will refer to this VPN tunnel.Call Direction: the direction of the call in the tunnel. If the remote sitewill always be creating the tunnel, select Incoming Only. If theAcerRouter 700 will always initiate the connection to the remote site,select Outgoing Only. Select Both if either side can initiate theconnection.The default setting is Both.Note: If you set Call Direction to Incoming Only, the Remote IP Addressfield does not display.My System Name: the name that the remote system will use to recognizeyour network.My System Password: the password the remote system will use toauthenticate your system.If the remote site does not require tunnelauthentication, leave this field blank.Note: Make sure the remote site is configured with your System Name (andSystem Password, if used).Remote System Name: the name of the remote network that is dialing in.Remote System Password: the password that yourAcerRouterAcerRouter will expect to see from the remote system. If youdo not require tunnel authentication, leave this field blank.Step 4 Click APPLY.Step 5 Set up a VPN Connection Profile. Select Connection Profiles from theMenu:Configuration - Connection ProfilesTunnel NameCall DirectionVPN Tunnel ConfigurationAPPLYBothRemote IP AddressMy System NameMy System PasswordRemote System NameRemote System PasswordCANCEL |
Questions and answers
Heed help?
Ask question about this manual
Related manuals for Acer 700 Series
Product
Learn More
Legal
Copyright © 2025 OneStart. All Rights Reserved