Menu
Acer 700 Series User Manual
Contents
|  AcerRouter 700 Series User Guide 3-25User Name: the name of the remote system’s user name that is dialing in.This field is case sensitive.User Password: the password associated with the user name above. Thisfield is case sensitive.Note: Authentication is Either, meaning that CHAP will be used to authenticate the incoming call, and if that fails, then PAP will be used.Step 6 Select APPLY to add the connection profile to the AcerRouter 700’sdatabase, or select ADVANCED for more options and proceed to the nextsection.Advanced Options for Dial-in ProfilesIf you press the Advanced button from the Single User Dial-in by ISDN screen, thefollowing screen appears.Note: The IPX options shown in this screen only appear if you selected Share NetWare (IPX) Resource on the SMART Configuration screen.Step 1 Enter the following information:.Caller ID Authen: select Yes if you want the AcerRouter 700 to check thecaller ID before accepting the call. This service may require a special agreement with your ISDN service provider.Caller ID Number: if you enabled Caller ID Authentication, enter the expected Caller ID Number in this field.STAC Compression: allows outgoing data to be compressed to achievehigher throughput, and compressed incoming data to be recognized. Theability to use compression depends on the capabilities of the ISP.Connection Profile ConfigurationIdle Timeout (0-3600 seconds) 120Single User Dial-in by ISDNEnable IPEnable IPXCaller ID Authen. Yes NoCaller ID NumberISDN Link Usage Two “B” Channels only when neededSTAC CompressionEnable encryptionEncryption keyYes NoYes NoYes NoRemote IPX Network NumberNo DESCANCEL OK MULTILINK |
Questions and answers
Heed help?
Ask question about this manual
Related manuals for Acer 700 Series
Product
Learn More
Legal
Copyright © 2025 OneStart. All Rights Reserved