Menu
Acer 700 Series User Manual
Contents
|  3-22 AcerRouter 700 Series User GuideSetting Up Dial-in User AccountsIf you selected Dial-in Access for Off-Site Users from the SMART Customizationscreen, follow the steps in this section to set up the AcerRouter 700 to allow dial-inaccess from remote users.ISDN ConfigurationStep 1 Select Dial-in Access for Off-Site Users in the SMART Customizationscreen. If you want to share NetWare resources on this connection, selectShare NetWare(IPX) Resource also.Click NEXT.Note: The SMART Customization screen displays the very first time you run the SMART software. To display this screen again, select Customize User Interface fromthe menu.Step 2 If you have already configured your ISDN interface, skip to Step 6. Otherwise, configure your ISDN interface now. Select ISDN from the menu:Configuration - WAN Interfaces - ISDNThe Port Configuration screen displays.Step 3 Select your ISDN Switch Type from the pull-down list. Your ISDN service provider will tell you what switch type you have.Step 4 After you select your ISDN Switch Type, you may be required to enter“Directory Phone Number 1” and “Directory Phone Number 2”, or “SPID1” and “SPID2.”If your switch type is Auto-detect (available in North America only), enter your Directory Phone Number 1 and Directory Phone Number 2.If your switch type is NT DMS-100, ATT 5ESS (Multipoint), N1-1, enter SPID1 and SPID2 (provided by your phone company).Simple Multifunction Access configuRation ToolBasic Internet AccessInternet Access with Advanced ConfigurationAccess to/from Remote Site (e.g., Branch Office)Dial-in Access for Off-Site UsersShare NetWare(IPX) ResourceSelect one or more items to be configured during this management sessionNextISDN Switch TypeDirectory Phone Number 1Directory Phone Number 2Port ConfigurationAPPLYISDNAuto-detect (North America only)ADVANCED |
Questions and answers
Heed help?
Ask question about this manual
Related manuals for Acer 700 Series
Product
Learn More
Legal
Copyright © 2025 OneStart. All Rights Reserved