Menu
Acer 700 Series User Manual
Contents
|  AcerRouter 700 Series User Guide 3-7be displayed.Step 2 Enter the following information:Profile Name: the name that you will use to identify this Internet accessprofile.Remote Phone Number: the ISDN telephone number of your ISP.ISP Account Name: the username of your ISP account.ISP Account Password: the password of your ISP account.Step 3 Click APPLY and TEST.Note: When you click APPLY and TEST, the AcerRouter attempts to place a callto your Internet Service Provider. Watch the Message window for any messages. Ifthe test is successful, your users will be ready to access the Internet. If not, the AcerRouter will try to give you enough information to let you know why the connection is not successful.If APPLY and TEST is successful, users on your LAN can now start to access the Internet. However, it is required that these devices have also been configured to obtainIP addresses automatically, similar to setting up a PC for configuring the AcerRouteras described in Chapter 2. Users may need to re-boot their computers in order toobtain the DNS information obtained during the APPLY and TEST operation.The procedure you just followed configures the first ISP account. If you want to configure more ISP accounts, from the SMART menu, select Configuration Profiles. Then the following screen will show:You need to select ISDN as the interface, and then Internet Access from the list ofconfiguration types shown.Remote Phone NumberISP Account NameISP Account PasswordInternet Access ConfigurationAPPLY and TESTISDNProfile NameSelect an interfaceNEXTInterface ConfigurationISDNSelect a Configuration Type Internet AccessRemote Office Dial-in/Dial-out |
Questions and answers
Heed help?
Ask question about this manual
Related manuals for Acer 700 Series
Product
Learn More
Legal
Copyright © 2025 OneStart. All Rights Reserved