Chapter 4 Advanced ConfigurationAfter the client computer is well configured, you can use any Java supported browseror Telnet program to configure the AcerRouter 101/201 series.4.1 Configuring by Web ManagementThe Main Menu includes Quick Setup is for quick installation as described in Chapter 3.The Advanced Menu includes Intranet Setting, Modem1 Setting, Modem2 Setting, Dial-In Setting, Device Admin, and Status Monitor.4.1.1 Intranet SettingClick ” Intranet Setting” in the Advanced menu as below.IP SettingsCheck the IP Address and Subnet Mask for the AcerRouter 101/201. If you wish to usethe AcerRouter’ s DHCP server function, enable Dynamic IP address and the numberof users. Remember if you have dial-in users, the last two IP addresses areautomatically left for them to avoid overlapping with the dial-out users’ IP Addresses.