Note: In Netscape Communicator 4.0, after popping up for a while, the QuickSetup window will be hidden behind the Netscape main window. Minimize theNetscape main window if wish to see the Web Management page.2. Select “ Enable” (default value) to key in the required information for Modem 1.Note: Modem2 Settings are similar to the Modem1’ s. Repeat step 3 if wish toinstall Modem2.3. For most ISP, it’ s ok to select PPP. Select the applicable ISP Name from thedrop-down box.4. For most PPP dial-up account, below 4 parameters are needed. Fill the ISPphone number, DNS IP, User ID and Password respectively. The informationshould be provided by ISP as soon as you applied the account.5. In Intranet Setting, enter the default value 192.168.1.1 and Subnet Mask255.255.255.0, or select one applicable from the drop-down box.6. Check all the values and click “ Save” to save the data and logout setup.