Note° GIf there is any other DHCP server in the Network, please select “ Specify an IPaddress” and use the default value “ 192.168.1.***”° ]*** is between 2 and 252° ^, setSubnet Mask “ 255.255.255.0” , Gateway IP “ 192.168.1.1” and DNS for configuration.After finishing TCP/IP set up, reboot the computer and run the browser to configure theAcerRouter 101/201. Afterwards, set up other PC in the LAN according to aboveprocedures.3.3 AcerRouter 101/201 settings1. Start your web browser (Netscape Navigator 4.0 or Microsoft Explorer4.0 later orother Java compatible browser) and type 192.168.1.1 in the address and press“ ENTER” key on your keyboard. The “ Username and Password Required”window will pop up. Leave the User Name blank and fill in the Password “ admin” .Then click “ OK” to enter Web Management.