Acces I/O products M.2-AIO16-16F Series Hardware Manual

Acces I/O products M.2-AIO16-16F Series Hardware Manual Manual pdf 2 page image

ACCES I/O Products, Inc. MADE IN THE USA mPCIe- and M.2-AIO16-16F Family Manual2 Rev B7aCHAPTER 1: QUICK STARTIt is recommended that you install the software package beforeinstalling the card in your computer. Install the software1 using ourstand-alone installer downloaded from the website.Run the installer you downloaded and follow the prompts to installthe software for your device.Once the software has been installed, shut down your system andcarefully install the card.Re-start your system. Once the computer finishes booting, yournew I/O should already be installed and ready for use; you canconfirm this by launching Device Manager and looking under the“Data Acquisition” section. If, for any reason, the device displays awarning triangle, right-click and select “Update Driver”.1 In Linux or OSX please refer to github.com/accesio/apci.CHAPTER 2: INTRODUCTIONThis manual is applicable to both the PCI Express Mini Card (mPCIe)and M.2 card versions of this product. The registers, I/O andperformance specifications are the same.• PCI Express Mini Card (mPCIe) type F1 or M.2 type 2280/2260,with latching I/O connector• 2× 16-bit, Bipolar, Differential, A/D converters sampling at up to1MHz, simultaneously• Software selectable as 16+0, 8+4, or 0+8 (Single-Ended +Differential Inputs)• 7 channel-by-channel programmable differential input rangesfrom ±0.3125V up to ±12V (48Vp-p)• A/D starts via software, external input, or periodic timer• A/D “Scan Start” mode optimizes inter-channel timing• High impedance, 8-channel input: 1 MΩ• 32k FIFO plus DMA for efficient, robust data streaming• 2× Digital I/O pins with flexible secondary functions• Four 16-bit analog outputs• 5 per-channel programmable ranges: 0V to 5V, 0V to 10V,±2.5V, ±5V, ±10V• Outputs Drive ±10mA Guaranteed• FDS models support Waveform playback on 1, 2, 3, or 4 DACssimultaneously at up to 1MHz (aggregate)• Onboard Watchdog with status output• RoHS compliant standardCHAPTER 3: HARDWAREThis manual applies to the following models: VENDEVM.2-/mPCIe-AIO16-16FDS A/D 16-bit, 2Msps, 4 D/Aw/ timed DAC Waveform playback 494F:C0EBM.2-/mPCIe-AIO16-16F A/D 16-bit, 2Msps, 4 D/A 494F:C0E8M.2-/mPCIe-AIO16-16A A/D 16-bit, 1Msps, 4 D/A 494F:C0E9M.2-/mPCIe-AIO16-16E A/D 16-bit, 500Ksps, 4 D/A 494F:C0EAM.2-/mPCIe-AI16-16F A/D 16-bit, 2Msps 494F:80E8M.2-/mPCIe-AI16-16A A/D 16-bit, 1Msps 494F:80E9M.2-/mPCIe-AI16-16E A/D 16-bit, 500Ksps 494F:80EAM.2-/mPCIe-AIO12-16A A/D 12-bit, 500Ksps, 4 D/A 494F:C058M.2-/mPCIe-AIO12-16 A/D 12-bit, 250Ksps, 4 D/A 494F:C059M.2-/mPCIe-AIO12-16E A/D 12-bit, 100Ksps, 4 D/A 494F:C05AM.2-/mPCIe-AI12-16A A/D 12-bit, 500Ksps 494F:8058M.2-/mPCIe-AI12-16 A/D 12-bit, 250Ksps 494F:8059M.2-/mPCIe-AI12-16E A/D 12-bit, 100Ksps 494F:805AThe mPCIe-AI* models are full-length “F1” mPCIe devices.The M.2-AI* models are 2280 M.2 with a breakaway for 2260 usewith B & M keys..All units are RoHS compliant.INCLUDED IN YOUR PACKAGE1× mPCIe-AIO16-16F Family cardor1×M.2-AIO16-16F Family cardAvailable accessories include:CAB-mPCIe-AIO 9 inch panel-mount DB37M twisted paircable assemblyADAP37F-MINI Direct plug-on terminal board mateswith DB37M on CAB-mPCIe-AIOLF-BRK-P9259-37 Mounting bracket for DB37M on CAB-mPCIe-AIOmPCIe-HDW-KIT2 Mounting hardware for 2mm mPCIemPCIe-HDW-KIT2.5 Mounting hardware for 2.5mm mPCIeContact the factory for information regarding additional accessories,options, and specials that may be available to best fit your specificapplication requirements, such as Industrial Temperature (-40°C to85°C).CHAPTER 4: CONFIGURATION SETTINGSAll configuration of this device is performed through software; thereare no jumpers or switches to set.